- 01. Our Products
High-Quality Steel, Tailored for Every Need Consistent Quality Across Every Steel Category
PRODUCT RANGE
Customisation available on request for all kind of Grades, Shape and Sizes.| Steel Type | Grade / Standard | Section | Hardness | Chemical Composition | Characteristics | Application | Heat Treatment | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Cr | Mo | V | Ni | P | S | |||||||
Plastic Mould Steel | 1.2311 / P20 / 40CrMnMo7 | Round/Flat | 28–32 HRC | 0.35–0.45 | 1.30–1.60 | 0.20–0.40 | 1.80–2.10 | 0.15–0.25 | — | — | 0.030 max | 0.030 max | Good machinability and uniform hardness. | Plastic injection moulds, mould bases. | Pre-Hardened |
| 1.2738 / P20 + Ni | Round/Flat | 30–34 HRC | 0.35–0.45 | 1.30–1.60 | 0.20–0.40 | 1.80–2.10 | 0.15–0.25 | — | 0.90–1.20 | 0.030 max | 0.030 max | High toughness with uniform hardness. | Large plastic injection moulds. | Pre-Hardened | |
| 1.2738 HH | Round/Flat | 36–40 HRC | 0.35–0.45 | 1.30–1.60 | 0.20–0.40 | 1.80–2.10 | 0.15–0.25 | 0.70–1.00 | 0.90–1.20 | 0.030 max | 0.030 max | Higher hardness with improved wear resistance. | Large moulds requiring long life. | Pre-Hardened | |
Cold Work Tool Steel | 1.2379 / D2 | Round/Flat | 58–62 HRC | 1.40–1.60 | 0.20–0.60 | 0.20–0.60 | 11.0–13.0 | 0.70–1.00 | — | — | 0.030 max | 0.030 max | High wear resistance and dimensional stability. | Blanking dies, punches, cold forming tools. | Hardened & Tempered |
| 1.2080 / D3 | Round/Flat | 58–61 HRC | 2.00–2.30 | 0.20–0.60 | 0.20–0.60 | 11.0–13.0 | — | 0.30–0.50 | — | 0.030 max | 0.030 max | Very high wear resistance and compressive strength. | Heavy-duty blanking and cutting tools. | Hardened & Tempered | |
Hot Work Tool Steel | 1.2343 / H11 | Round/Flat | 48–52 HRC | 0.35–0.40 | 0.30–0.60 | 0.80–1.20 | 4.80–5.50 | 1.20–1.50 | 0.80–1.20 | — | 0.030 max | 0.030 max | Good toughness with thermal fatigue resistance. | Die casting dies, forging tools. | Hardened & Tempered |
| 1.2344 / H13 | Round/Flat | 48–52 HRC | 0.35–0.40 | 0.30–0.60 | 0.80–1.20 | 4.80–5.50 | 1.30–1.50 | — | — | 0.030 max | 0.030 max | Excellent hot strength and thermal shock resistance. | Die casting moulds, extrusion dies. | Hardened & Tempered | |
Case Hardened Steel | 20MnCr5 | Round | Case Hdnd | 0.17–0.24 | 1.00–1.40 | 0.15–0.35 | 0.70–1.00 | — | — | — | 0.025 max | 0.035 max | Tough core with hard wear-resistant surface. | Gears, camshafts, pinions. | Case Hardened |
| SAE 8620 | Round | Case Hdnd | 0.18–0.23 | 0.70–0.90 | 0.15–0.35 | 0.40–0.60 | 0.15–0.25 | — | 0.40–0.70 | 0.025 max | 0.025 max | Excellent core toughness and fatigue strength. | Automotive gears, shafts. | Case Hardened | |
| EN-353 | Round | Case Hdnd | 0.17–0.23 | 0.60–0.90 | 0.10–0.35 | 0.80–1.10 | 0.08–0.15 | — | 1.00–1.50 | 0.025 max | 0.035 max | High surface hardness with tough core. | Heavy-duty gears and pinions. | Case Hardened | |
| EN-36 | Round | Case Hdnd | 0.17–0.24 | 1.00–1.40 | 0.15–0.35 | 0.70–1.00 | — | 0.15–0.25 | — | 0.025 max | 0.035 max | Excellent core toughness with hard surface. | Gears, cams, wear-resistant parts. | Case Hardened | |
Spring Steel | EN-47 / 50CrV4 | Round | 45–50 HRC | 0.45–0.55 | 0.50–0.80 | 0.15–0.35 | 0.90–1.20 | — | — | — | 0.025 max | 0.025 max | High fatigue strength and elasticity. | Leaf springs, automotive spring parts. | Hardened & Tempered |
Alloy Steel | EN-19 / 42CrMo4 | Round | 28–35 HRC | 0.35–0.45 | 0.50–0.80 | 0.10–0.35 | 0.90–1.50 | 0.20–0.40 | — | — | 0.035 max | 0.035 max | Good strength, toughness, and machinability. | Gears, shafts, studs, machine components. | Quenched & Tempered |
| EN-24 / 34CrNiMo6 | Round | 30–38 HRC | 0.32–0.40 | 0.40–0.70 | 0.10–0.35 | 0.90–1.30 | 0.20–0.35 | — | 1.30–1.80 | 0.035 max | 0.035 max | High tensile strength with excellent impact resistance. | Heavy-duty shafts, gears. | Quenched & Tempered | |
| EN-31 / 100Cr6 | Round/Flat | 58–62 HRC | 0.95–1.05 | 0.30–0.75 | 0.10–0.35 | 1.00–1.60 | — | — | — | 0.050 max | 0.050 max | High hardness and wear resistance. | Bearings, shafts, gauges. | Through Hardened | |
| EN-9 / C55 | Round/Flat | 45–55 HRC | 0.50–0.60 | 0.50–0.80 | 0.15–0.35 | — | — | — | — | 0.040 max | 0.040 max | High strength and wear resistance. | Axles, agricultural tools. | Hardened & Tempered | |
Nitriding Steel | EN-41B | Round | 950–1100 HV | 0.35–0.45 | ≤0.65 | 0.10–0.45 | 1.40–1.80 | 0.10–0.25 | — | — | 0.035 max | 0.035 max | Excellent surface hardness after nitriding. | Crankshafts, gears, piston rods. | Nitrided |
Carbon Steel Plates | C45 / IS 1730 | Round/Plates | 20–25 HRC | 0.35–0.45 | 0.50–0.80 | 0.15–0.35 | — | — | — | — | 0.040 max | 0.040 max | Moderate strength with good machinability. | Machine components, shafts, plates. | Normalized |
MS Plates | Mild Steel IS 2062 / ASTM A36 | Round/Plates | — | 0.15–0.25 | 0.60–1.50 | 0.15–0.40 | — | — | — | — | 0.040 max | 0.040 max | Good weldability and formability. | Structural fabrication, base plates. | As Rolled |
Plastic Mould Steel
Characteristics:Good machinability and uniform hardness.
Application:Plastic injection moulds, mould bases.
Chemical CompositionCharacteristics:High toughness with uniform hardness.
Application:Large plastic injection moulds.
Chemical CompositionCharacteristics:Higher hardness with improved wear resistance.
Application:Large moulds requiring long life.
Chemical CompositionCold Work Tool Steel
Characteristics:High wear resistance and dimensional stability.
Application:Blanking dies, punches, cold forming tools.
Characteristics:Very high wear resistance and compressive strength.
Application:Heavy-duty blanking and cutting tools.
Hot Work Tool Steel
Characteristics:Good toughness with thermal fatigue resistance.
Application:Die casting dies, forging tools.
Characteristics:Excellent hot strength and thermal shock resistance.
Application:Die casting moulds, extrusion dies.
Case Hardened Steel
Characteristics:Tough core with hard wear-resistant surface.
Application:Gears, camshafts, pinions.
Characteristics:Excellent core toughness and fatigue strength.
Application:Automotive gears, shafts.
Characteristics:High surface hardness with tough core.
Application:Heavy-duty gears and pinions.
Characteristics:Excellent core toughness with hard surface.
Application:Gears, cams, wear-resistant parts.
Spring Steel
Characteristics:High fatigue strength and elasticity.
Application:Leaf springs, automotive spring parts.
Alloy Steel
Characteristics:Good strength, toughness, and machinability.
Application:Gears, shafts, studs, machine components.
Characteristics:High tensile strength with excellent impact resistance.
Application:Heavy-duty shafts, gears.
Characteristics:High hardness and wear resistance.
Application:Bearings, shafts, gauges.
Characteristics:High strength and wear resistance.
Application:Axles, agricultural tools.
Nitriding Steel
Characteristics:Excellent surface hardness after nitriding.
Application:Crankshafts, gears, piston rods.
Carbon Steel Plates
Characteristics:Moderate strength with good machinability.
Application:Machine components, shafts, plates.
MS Plates
Characteristics:Good weldability and formability.
Application:Structural fabrication, base plates.